ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - front view | Silarius ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - side view | Silarius ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - rear view | Silarius ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - detail view | Silarius ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - detail view | Silarius
ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - front view | Silarius
ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - side view | Silarius
ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - rear view | Silarius
ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - detail view | Silarius
ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm - detail view | Silarius

ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm

$359.95

DS18 ELITE ZXI.4 Full-Range 4-Channel Class D Amplifier 125 Watts x 4 @ 4-Ohm RMS

Over time evolution is inevitable. The same can be said for DS18's new Z series model of amplifiers! We took one of our best selling lines and upgraded every aspect of it. They now put out even more power, have more top of the line components, and are guaranteed to deliver amazing quantities of RMS power on demand. The previous Z series was very powerful to begin with and we packed all new DS18 branded boards with much more efficient electronics, and with all new heat sync casings to make an amazing amp line even more perfect for your needs. You have your pick of multiple 2 channel, 4 channel, and Monoblock amps in this line to power every aspect of your DS18 audio system.

Highlights

  • Elegant design that retains very high durability with incorporated high efficiency heat sync.
  • High quality circuit board to give the most power with the highest efficiency rate providing high power on demand.
  • Easily tuned crossover and gain controls for the perfect sound settings in your vehicle.
Technical Details
Download ZXI.4 Product Manual


Model ZXI.4
Class D
Channels 4
RMS POWER @ 4 OHMS 125W x 4CH
RMS POWER @ 2 OHMS 185W x 4CH
RMS POWER @ 4 OHMS BRIDGE 370W x 2CH
PEAK POWER @ 4 OHMS 200W x 4CH
PEAK POWER @ 2 OHMS 300W x 4CH
PEAK POWER @ 4 OHMS BRIDGE 600W x 2CH
MINIMUM IMPEDANCE 2 OHMS
FREQUENCY RESPONSE 20Hz - 20KHz
THD % 0.10%
INPUT SENSITIVITY 0.2-6V
SIGNAL/NOISE RATIO >90dB
CROSSOVER HIGH PASS 40 - 4KHz
CROSSOVER LOW PASS 40 KHz
POWER INPUT SIZE 4GA
DIMENSIONS LxDxH (INCHES) 9.5x5.7x1.9
More information View images

Frequently Asked Questions

How many channels does the ZXI 4-Channel Class D Amplifier 4 X 125 Watts Rms @ 4-Ohm have?+
Channel count is listed in the product specs. DS18 amplifiers are available in mono, 2-channel, 4-channel, and 5-channel configurations.
What is the RMS power output?+
Rated RMS power is in the product specifications. Match the amp's RMS output to your speakers' RMS handling for best performance.
Does it have built-in crossovers?+
Most DS18 amplifiers include built-in high-pass and low-pass crossover filters. Some also include a subsonic filter for subwoofer applications.
What wire gauge does it require?+
Refer to the product manual for recommended power wire gauge. Higher-power amplifiers typically require 4 AWG or larger.
Is it compatible with my head unit?+
This amplifier accepts standard RCA inputs and speaker-level inputs, making it compatible with most factory and aftermarket head units.

You may also like

Recently viewed