Eye Spy Display Pro | Touchscreen Surveillance, Tracker, ALPR & Drone Detector

Before You Order

• Included: Eye Spy Display Pro with firmware installed, 2-inch touchscreen, integrated 500mAh rechargeable battery and USB-C cable.
• Power: Rechargeable battery and USB-C charging/external power.
• Detection and alerts: Supported Bluetooth LE and 2.4 GHz Wi-Fi signatures for ALPR, trackers, cameras and compatible drone broadcasts; screen and speaker, with vibration hardware.

Detection limits: Alerts depend on supported wireless signatures, signal conditions and installed firmware. The device cannot detect every target; no alert does not prove that an area is free of surveillance or tracking equipment.

Bluetooth LE and Wi-Fi monitoring run in scheduled phases. Brief transmissions can be missed while another phase is active.

Eye Spy Display Pro | Touchscreen Surveillance, Tracker, ALPR & Drone Detector

Hardware Platform

M5Stack Core2

Processor

ESP32-D0WDQ6-V3 dual-core 32-bit processor

Up to 240 MHz

Wireless

2.4 GHz Wi-Fi

Bluetooth LE

Display

2-inch IPS color TFT LCD

320 × 240 resolution

Touch Interface

FT6336U capacitive touchscreen

Three programmable virtual button zones

Memory

16MB Flash

8MB PSRAM

520KB SRAM

Audio

Integrated speaker

NS4168 I2S amplifier

Haptic Feedback

Integrated vibration motor

Battery

500mAh rechargeable lithium battery

Power Management

AXP192 power management system

Connectivity

USB Type-C

Grove interface

M5-Bus expansion interface

Storage Expansion

microSD card slot

Sensors

6-axis MPU6886 IMU

Integrated SPM1423 microphone

RTC

BM8563 real-time clock

Dimensions

54 × 54 × 16.5 mm

Weight

Approximately 54.9g

Important Detection Limitations

Eye Spy is a wireless surveillance-awareness device, not a universal surveillance detector.

It identifies supported devices when they expose wireless characteristics recognized by the installed firmware and Eye Spy observes those characteristics during the appropriate scanning phase.

It does not identify surveillance equipment solely because a camera, microphone, tracker, or other sensor exists nearby.

A supported device might not be detected if:

• Its relevant wireless radio is disabled
• Its identifier or wireless behavior has changed
• Its signal is outside usable range
• Its signal falls below the configured RSSI threshold
• Its relevant transmission occurs outside the applicable Eye Spy scanning window
• The manufacturer changes its firmware or hardware
• The device uses an unsupported frequency or protocol
• The device does not expose a currently supported signature
• Another Eye Spy detection phase occupies the shared radio when a short transmission occurs

Eye Spy shares radio time across detection methods. Short transmissions can be missed while another scanning phase is active.

No detection should be interpreted as proof that an environment contains no surveillance or tracking equipment.

Broad Surveillance Awareness. One Device. No Subscription.

Eye Spy Display Pro combines Bluetooth LE monitoring, Wi-Fi scanning, promiscuous Wi-Fi monitoring, confidence-based detection, persistent-device awareness, a touchscreen, rechargeable battery, speaker, vibration hardware, expandable storage, additional memory, and open-source firmware.

It provides a self-contained platform for surveillance awareness, tracker awareness, ALPR research, drone Remote ID monitoring, privacy research, cybersecurity education, vehicle use, and wireless experimentation.

No cloud account. No subscription. No required phone.

Eye Spy is developed by SimeonOnSecurity and offered on preconfigured compatible hardware by STS Collective.

View Eye Spy Source Code & Technical Documentation

Visit SimeonOnSecurity

Shop STS Collective Security & Privacy Tools